This is an old revision of the document!
- virtmanagerhell
- Jonathan Haack
- Haack's Networking
- netcmnd@jonathanhaack.com
To make a VM from the command line, do the following. Note that this recipe assumes you have already created your virtual switch, br0. It also presumes you have already created your virtual disk, and if you have not, simply run sudo qemu-img create -f raw new.img 1000G.
sudo virt-install --name=new.img \ --os-type=Linux \ --os-variant=debian10 \ --vcpu=1 \ --ram=2048 \ --disk path=/mnt/vms/students/new.img \ --graphics spice \ --location=/mnt/vms/isos/debian-11.4.0-amd64-netinst.iso \ --network bridge:br0
To clone an existing image, do the following:
virt-clone \ --original=clean \ --name=sequoia \ --file=/mnt/vms/students/sequoia.img
If you have a legacy image that needs to be larger, then install a few tools and the proceed to expand the virtual hard disk as follows:
apt install qemu-img kpartx qemu-img resize debian10.img +50G
After expanding the virtual hard disk, open gparted in X passthrough / command line and expand the existing partition into as much of the the new space as you prefer. And to rename a VM (domain), do the following:
virsh shutdown <old-name> virsh domrename <old-name> <new-name>
To delete a domain, virt-manager uses the undefine command. To remove the accompanying storage with it, parse the command as follows:
virsh undefine guest1 --remove-all-storage
If you need to force stop a machine, virt-manager uses the destroy command, as follows:
virsh destroy guest1
I prefer the raw format (.img) but if I change my mind later, perhaps because I want snapshots, then I can easily shutdown the machine and convert the image as follows:
qemu-img convert -f raw -O qcow2 guest1.img guest1.qcow2
The rest from here on out is my attempt at resizing an .img using tools exclusively from virsh / virt-manager. These are highly risky moves and totally not needed for day to day operations. It was more of a mission I was on and based on a tutorial I used nearly 15 years ago when expanding a Windows VM I used for teaching software that was only on that VM. At any rate, I have only succeeded twice doing this, and often get confused looking at the l00ps. Proceed with caution!
sudo apt install libguestfs-tools
After that, confirm the location of your virtual machine. You need to know the actual name of the .img file for this to work. Usually (unless it was changed by someone), this is the name that appears in the virt-manager window.
virsh dumpxml putnameofimagehere | xpath -e /domain/devices/disk/source
Navigate to the directory it spit out, and back up the image and rename it before you proceed:
cd /var/lib/libvirt/images/ sudo cp /var/lib/libvirt/images/putnameofimagehere.img /var/lib/libvirt/images/putnameofimagehere.img.bak
Once you know the name of the .img file and the location of it, prepare the virtual file systems for expansion:
virt-filesystems --long --parts --blkdevs -h -a /var/lib/libvirt/images/putnameofimagehere.img
Build a new, larger, container for the final disk, and set it aside for the merge/expansion that the tools are going to provide:
truncate -s 128G /var/lib/libvirt/images/outdisk
Now it is time to resize the existing image, using the container you just created:
virt-resize --expand /dev/sda2 /var/lib/libvirt/images/putnameofimagehere.img /var/lib/libvirt/images/outdisk
Okay, now we need to rename the new image we created to the name that virt-manager is looking for, i.e., the name of the original image. Remember, you should have the .bak file you made earlier in case this does not work. This is done as follows:
cp /var/lib/libvirt/images/putnameofimagerhere.img /var/lib/libvirt/images/putnameofimagerhere.img.old mv /var/lib/libvirt/images/outdisk /var/lib/libvirt/images/putnameofimagehere.img
Made yet another attempt to do by command line in 2022. Install packages required for resizing virtual hard disks and for listing partitions inside virtual hard disks.
apt install qemu-img kpartx
Add 50G of size to the emulated physical hard disk. This is not to be confused with adding space to, or extending, the partition inside it.
qemu-img resize debian10.img +50G
Mount the image file in the present directory, and show all of its mappings.
kpartx -v -a debian10.img
Now, it is time to extend the partition. Your loops might have different #s after, use tab to find the right one (prolly largest #).
parted /dev/loopXX print
You will get output like this:
Model: Unknown (unknown) Disk /dev/loopXX: 142GB Sector size (logical/physical): 512B/512B Partition Table: loop Disk Flags: Number Start End Size File system Flags 1 0.00B 142GB 142GB ext4
Remove the appropriate mapping. In my case, I am extending the boot volume of a virtual machine, so it was entry 1.
parted /dev/loopXX rm 1
Extend the partition from the start of the mapping you removed to the upper size limit listed in Disk.
parted /dev/loopXX mkpart primary ext4 0.00B 142GB
Verify the new mapping.
parted /dev/loopXX print
Run fsck before resizing the file system. You here appending “p1” to the name in order to make a new partition or mapping.
e2fsck -f /dev/mapper/loopXXp1
Extend the file system inside the partition to the entirety of the partition table.
resize2fs /dev/mapper/loopXXp1
Unmount the image
kpartx -d debian10.img
— oemb1905 2022/11/12 07:27
