Haack's Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
-------------------------------------------
  * **rstudio** 
  * **Jonathan Haack**
  * **Haack's Networking**
  * **netcmnd@jonathanhaack.com**
-------------------------------------------

//rstudio// 

-------------------------------------------

This is to set up [[https://rstudio.com/products/rstudio/download/|R-Studio]] on Debian.  As always, first setup TLS/LAMP first; see [[https://wiki.haacksnetworking.com/doku.php?id=computing:apachesurvival|Apache Survival]] for help with doing so.  Once you have that setup, download and install R-Studio.  **Always check rstudio's recommendations** as well, but currently they recommend using //gdebi// as follows:

  cd ~
  sudo apt install r-base
  sudo apt install gdebi
  wget https://download2.rstudio.org/server/debian9/x86_64/rstudio-server-1.2.1335-amd64.deb
  sudo gdebi rstudio-server-1.2.1335-amd64.deb

Make sure you already have an existing LAMP stack running for your domain on at least one virtual host with TLS.  If you do not yet have that, please see the apachesurvival tutorial first.  If you can do that, then set up two virtual host configuration files for http/https.  Those are called reverse proxy virtual hosts according to the apache project.  I adapted two recipes I contributed to for gitlab-ce to work with rstudio.  First, create a virtual host to receive http requests for the domain you are using.

  sudo nano /etc/apache2/sites-available/rstudioserver.conf
  
If you look at this http config, you can adapt the domain and ports to your liking: [[https://repo.haacksnetworking.com/oemb1905/haackingclub/-/blob/master/apache/virtualhosts/rstudio.jonathanhaack.com.conf|rstudioserver.conf]]

  sudo nano /etc/apache2/sites-available/rstudioserver-ssl.conf

This https config will get you started (this is definitely not optional if this is public facing as described in this tutorial): [[https://repo.haacksnetworking.com/oemb1905/haackingclub/-/blob/master/apache/virtualhosts/rstudio.jonathanhaack.com-ssl.conf|rstudioserver-ssl.conf]]

  sudo a2ensite rstudioserver.conf
  sudo a2ensite rstudioserver-ssl.conf
  sudo systemctl restart apache2
  sudo systemctl restart rstudio-server

 --- //[[jonathan@haacksnetworking.com|oemb1905]] 2021/04/02 20:12//
Haack's Wiki

User Tools

Site Tools

Page Tools
