User Tools

Site Tools


computing:apachesurvival

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
computing:apachesurvival [2018/05/06 03:43] oemb1905computing:apachesurvival [2024/02/20 23:00] (current) oemb1905
Line 3: Line 3:
   * **Jonathan Haack**   * **Jonathan Haack**
   * **Haack's Networking**   * **Haack's Networking**
-  * **netcmnd@jonathanhaack.com**+  * **webmaster@haacksnetworking.org**
  
 ------------------------------------------- -------------------------------------------
  
-//apachesurvival// +//apachesurvival//      
  
 ------------------------------------------- -------------------------------------------
  
-This tutorial is for users of Debian GNU/Linux using the LAMP stack, wanting TLS encryption, multiple self-hosted websites, feature rich content management, etc., without sacrificing ownership or security.  This tutorial will cover:+This tutorial is for users of Debian GNU/Linux to set up a LAMP stack, TLS encryption, and a web-server which can serve two or more websites using apache's virtual hosts I will also discuss how to set up basic protection on your firewall and a script that will make sure apache stays running and keep down time to a minimum.  The first step is to create two content directories for each of the websites.  Later, we will configure two virtual host configuration files in apache for each of these. Using site1.com and site2.com as an example, do the following and/pr adjust as needed 
  
-  * Establish LAMP stack +  sudo apt install apache2 php mariadb-server 
-  * Virtual hosts for more than one website +  sudo mkdir -p /var/www/site1.com/public_html 
-  * Creation of self-signed SSL +  sudo mkdir -p /var/www/site2.com/public_html 
-  * Let's Encrypt with Certbot +  sudo chown -R $USER:$USER /var/www/site1.com/public_html 
-  * MySQL survival commands +  sudo chown -R $USER:$USER /var/www/site2.com/public_html 
-  * Installation of JoomlaWordpressDokuwikiCacti +  sudo chmod 755 /var/www 
-  * Installation and configuration of local sftp server +  
-  * Directory permissions +Later, when you change one or both of these sites to a content management system (CMS)you will need to adjust ownership/permissions.  For exampleWP requires that many directories be owned by www-data, and not the root or other user.  however, those changes should be done after this tutorial - not during.  Before setting those up, follow these steps and ensure both http/https are working, set up a cert cron job for TLS with LE, and then at that point, install your CMS and tweak ownership/permissions at that time.  The next step is to make a small website in each directory:
-  * firewall rules with ufw +
-  * symbolic links for External Drive outside of root of webserver (risky)+
  
-There is probably a bit more ... but this will get us started.  With the exception of Cacti, these are skills I learned on BSD macOS and then migrated to Debian GNU/Linux which runs them better, has better implementations of the LAMP stack, more feature control, and most importantly is #freesoftware.+  sudo nano /var/www/site1.com/public_html/index.html  
 +  <html> 
 +    <head> 
 +      <title>site1</title> 
 +    </head> 
 +    <body> 
 +      <h1>site1</h1> 
 +    </body> 
 +  </html> 
  
--------------------------------------------+Make sure to repeat the above steps for site2.com.  Once that's done, it is time to set up the virtual host configuration files in Debian's apache implementation: 
 +   
 +  sudo cp /etc/apache2/sites-available/000-default.conf /etc/apache2/sites-available/site1.com.conf   
 +  sudo nano /etc/apache2/sites-available/site1.com.conf 
 +  <VirtualHost *:80> 
 +        ServerAdmin name@site1.com 
 +        ServerName site1.com 
 +        ServerAlias www.site1.com 
 +        DocumentRoot /var/www/site1.com/public_html 
 +        ErrorLog ${APACHE_LOG_DIR}/error.log 
 +        CustomLog ${APACHE_LOG_DIR}/access.log combined 
 +  </VirtualHost> 
 +   
 +Make sure to repeat the steps above for the second virtual host site2.com.conf.  Ok, now time to enable the virtual hosts with the a2ensite command, and disable/backup the default site since you won't need that any longer: 
 +   
 +  sudo a2ensite site1.com.conf 
 +  sudo a2ensite site2.com.conf 
 +  sudo cp -r /var/www/html /root/html-bak 
 +  sudo rm -r /var/www/html 
 +  sudo a2dissite 000-default.conf 
 +   
 +Now, in order for the server to correctly identify itself in headers, for example, when WP or another CMS sends an email to a user to restore their account, you need to adjust your host and domain name in the hosts file. if you prefer put some local dns entries in /etc/hosts 
 +   
 +  sudo nano /etc/hosts 
 +   
 +Append something like this to the bottom: 
 +   
 +  xxx.xxx.xxx.xxx site1.com site1 
 + 
 +Make sure to do this for each domain.  Check your configurations up until now and then restart the service and check if it starts: 
 + 
 +  sudo apache2ctl configtest 
 +  sudo systemctl restart apache2.service 
 +    
 +Visit site1.com and site2.com and debug.  Once both properly resolve, it is time to set up https.  Before we setup Let's Encrypt, we will first create your own self-signed certificates for each virtual host: 
 + 
 +  sudo openssl req -x509 -nodes -days 7305 -newkey rsa:2048 -keyout /etc/ssl/private/site1.key -out /etc/ssl/certs/site1.crt 
 +   
 +Repeat this for site2.com and make sure to answer the question about your FQDN correctly.   
 + 
 +Configure the TLS virtual hosts for each domain previously configured above.  If you chose not to do the snippet approach above, then you will start here and skip the snippet portion (and merely add any configurations you need to the ssl virtual hosts directly): 
 + 
 +  sudo cp /etc/apache2/sites-available/default-ssl.conf /root/default-ssl.conf.bak 
 +  sudo cp /etc/apache2/sites-available/default-ssl.conf /etc/apache2/sites-available/site1.com-ssl.conf 
 + 
 +Open the first TLS virtual host configuration file: 
 + 
 +  sudo nano /etc/apache2/sites-available/site1.com-ssl.conf 
 +  <IfModule mod_ssl.c> 
 +        <VirtualHost _default_:443> 
 +                ServerAdmin name@site1.com 
 +                ServerName site1.com 
 +                DocumentRoot /var/www/site1.com/public_html 
 +                </Directory> 
 +                BrowserMatch "MSIE [2-6]" \ 
 +                               nokeepalive ssl-unclean-shutdown \ 
 +                               downgrade-1.0 force-response-1.0 
 +        </VirtualHost> 
 +  </IfModule> 
 + 
 +Repeat the steps above for the site2.com-ssl.conf virtual host. If you want to enter some modules, then do so after the "downgrade line" and before the </VirtualHost> line and start with <IfModules> and end with </IfModules> Before we test the website for functionality, we need to  
 +   
 +  sudo a2enmod ssl 
 +  sudo a2enmod headers 
 +  sudo apache2ctl configtest 
 +  sudo a2ensite site1.com-ssl.conf 
 +  sudo a2ensite site2.com-ssl.conf 
 +   
 +Visit both sites using Firefox, and ensure they resolve if not, check each step and debug.  Remember, you can trust the browser warning, because you set this cert up!  However, for others to access your site, you need to use a trusted authority like Let's Encrypt.  Here's how we do this:  
 + 
 +  sudo apt install certbot letsencrypt python3-certbot-apache 
 +  sudo certbot --authenticator standalone --installer apache -d site1.com --pre-hook "systemctl stop apache2" --post-hook "systemctl start apache2" 
 + 
 +When LE prompts you, make sure to specify to "redirect" traffic to https.  Make sure to run the second command again changing the domain to site2.com.  Now, restart the service: 
 + 
 +  sudo systemctl restart apache2 
 +   
 +Let's Encrypt expires often, so you likely want a cron job to update everything for you when/if needed: 
 +   
 +  sudo crontab -e 
 +  30 2 * * 1 /usr/bin/certbot renew >> /var/log/le-renew.log 
 +  sudo systemctl restart cron.service 
 +  sudo systemctl restart apache2 
 + 
 +If this is a public IP on a VPS and you are new to GNU/Linux, then you should set up a firewall as a precaution.  Here is a basic way to do this: 
 +   
 +  sudo apt install ufw 
 +  sudo ufw allow 22 
 +  sudo ufw allow 80 
 +  sudo ufw allow 443 
 +  sudo ufw enable 
 +   
 +If you are comfortable with GNU/Linux and know how to check ''netstat -tulpn'' etc., and properly monitor what services are listening and to what netmask, then you can skip the firewall step.  The last thing I usually do on new setups is make a script called apache-restart.sh that monitors apache to ensure its running every minute: 
 + 
 +  sudo touch /usr/local/bin/apache-restart.sh 
 +  sudo chmod 750 /usr/local/bin/apache-restart.sh 
 +  sudo chown $USER:$USER /usr/local/bin/apache-restart.sh 
 +  sudo nano /usr/local/bin/apache-restart.sh 
 +   
 +Ok, now that we created the script file and made it executable, paste in the contents below but adjust them to your needs: 
 + 
 +  #!/bin/sh 
 +  #functions 
 +  RESTART="/bin/systemctl restart apache2.service" 
 +  SERVICE="apache2.service" 
 +  LOGFILE="/home/sexa/Desktop/apache.log" 
 +  #check for the word dead in the service output from systemctl 
 +  if 
 +          systemctl status apache2.service | grep dead 
 +  then 
 +          echo "Person, apache2 failed at $(date), so I restarted it for you." >> $LOGFILE 
 +          $RESTART >> $LOGFILE 
 +          mail -s "[apache-restart]-$(hostname)-$(date)" email@email.com < $LOGFILE 
 +  else 
 +  exit 
 +  fi 
 + 
 +Alright, no point in making an apache monitoring script unless it runs automatically, so let's create a cron job to do that: 
 + 
 +  sudo crontab -e 
 +  * * * * * /bin/bash /usr/local/bin/apache-restart.sh >> /home/user/Desktop/apache-restart.log 
 +  sudo systemctl restart cron 
 + 
 +Also, log files can build up quickly, so adjust logrotate so that you don't use up precious storage recklessly!  First, create a new entry in the logrotate daemon directory: 
 + 
 +  sudo nano /etc/logrotate.d/apache-restart 
 +  /home/user/Desktop/apache-restart.log { 
 +        daily 
 +        rotate 10 
 +        delaycompress 
 +        compress 
 +        notifempty 
 +        missingok 
 +        size 100000k 
 +  }
  
 +Awesome!  You now have to super basic websites that both resolve and use TLS.  Now, consider replacing those basic website shells with some type of CMS or other content.  Here are some examples that I provide:
  
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:selfhostedwp|Self-Hosted Word Press]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:migratewp|Manually Migrating Word Press]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:nextcloud|Nextcloud]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:moodle|Moodle]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:dokuwiki|Dokuwiki]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:smokeping|Smokeping]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:cactiwebserver|Cacti]]
 +  * [[https://wiki.haacksnetworking.org/doku.php?id=computing:gitlab-ce|Gitlab-ce]] (requires extensive mods)
  
 +This tutorial is a designated "Invariant Section" of the "Technotronic" section of Haack's Wiki as described on the [[https://wiki.haacksnetworking.org/doku.php?id=start|Start Page]].
  
 + --- //[[webmaster@haacksnetworking.org|oemb1905]] 2024/02/20 23:00//
computing/apachesurvival.1525578193.txt.gz · Last modified: 2018/11/25 01:33 (external edit)