-------------------------------------------
  * **nmbbb** 
  * **Jonathan Haack**
  * **Haack's Networking**
  * **netcmnd@jonathanhaack.com**

-------------------------------------------

//nmbbb//      

-------------------------------------------

This tutorial is for setting up a BBB instance using their installer script. In my case, this instance will run in a virtualized environment on a physical host with a symmetric gig connection.

-------------------------------------------

Step #1

Okay, so I installed a clean Ubuntu 18.04.6 on a VM with 8 processors and 16GB RAM.  I used the install script found at the [[https://docs.bigbluebutton.org/2.3/install.html#Install_|BBB documentation/install website]]:

  wget -qO- https://ubuntu.bigbluebutton.org/bbb-install-2.5.sh | bash -s -- -v focal-250 -s bbb.example.com -e notice@example.com  -a -w
  
Since my data center does not support ipv6, I needed to disable this. I am working with Brown Rice to make ipv6 a reality, but all in good time. BBB ipv6 [[https://docs.bigbluebutton.org/support/troubleshooting.html#freeswitch-fails-to-bind-to-port-8021|disable resource]].

  sudo nano /opt/freeswitch/etc/freeswitch/autoload_configs/event_socket.conf.xml
  <param name="listen-ip" value="127.0.0.1"/>
  sudo mv /opt/freeswitch/etc/freeswitch/sip_profiles/internal-ipv6.xml /opt/freeswitch/etc/freeswitch/sip_profiles/internal-ipv6.xml_
  sudo mv /opt/freeswitch/etc/freeswitch/sip_profiles/external-ipv6.xml /opt/freeswitch/etc/freeswitch/sip_profiles/external-ipv6.xml_
  
It is now time to set up Greenlight.

  mkdir ~/greenlight
  cd ~/greenlight
  
If you lock yourself out of admin account after a vanilla install.
  
  docker run --rm bigbluebutton/greenlight:v2 cat ./sample.env > .env
  docker run --rm bigbluebutton/greenlight:v2 bundle exec rake secret
  sudo bbb-conf --secret
  docker run --rm --env-file .env bigbluebutton/greenlight:v2 bundle exec rake conf:check
  docker run --rm bigbluebutton/greenlight:v2 cat ./greenlight.nginx | sudo tee /etc/bigbluebutton/nginx/greenlight.nginx
  sudo systemctl restart nginx

Now, let's start greenlight:  

  cd ~/greenlight
  docker-compose -v
  mkdir /etc/bigbluebutton/nginx/
  touch /etc/bigbluebutton/nginx/greenlight.nginx
  docker run --rm bigbluebutton/greenlight:v2 cat ./docker-compose.yml > docker-compose.yml
  export pass=$(openssl rand -hex 24); sed -i 's/POSTGRES_PASSWORD=password/POSTGRES_PASSWORD='$pass'/g' docker-compose.yml;sed -i 's/DB_PASSWORD=password/DB_PASSWORD='$pass'/g' .env
  docker-compose up -d
  

 --- //[[jonathan@haacksnetworking.org|oemb1905]] 2022/11/11 22:12//